Daken M803994 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Daken M803994에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Daken M803994 16 페이지.

Step Three: Finish broadcast kit assembly

1. Remove hex plug from pump outlet.

2. Push broadcast lance into broadcast bracket. Note orientation.

3. Install hose barb into open port on pump. Hand tighten, then one turn with a wrench.

4. Connect 24" hose from pump to broadcast lance using two hose clamps. Follow hose

clamp instructions below.

5. Thread broadcast nozzle hand tight onto the end of the lance. Note orientation.

Hose clamp installation instructions

Slide hose clamp over the end of the hose

Push the hose onto the hose barb

Slide the hose clamp over the hose barb

Tighten the hose clamp

Assembly (continued)

Remove the

hex plug

Broadcast

lance

Broadcast

nozzle

Hose clamp

24" hose

Hose clamp

Hose barb