DSE RE-BCC Series 소유자 매뉴얼

{카테고리_이름} DSE RE-BCC Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSE RE-BCC Series 3 페이지. Analog and ahd waterproof cameras with ir, cylindrical models, spherical models

페이지 인쇄

OWNER'S MANUAL

RE-BCCxxx (cylindrical models)

RE-DCCxxx (spherical models)

Product description

This range of analog cameras is realized to satisfy all requirements of video surveillance in both

indoor and outdoor. The cameras are contained in a casing made of aluminum tin that can be

installed outdoors without protections and does not fear the rain. The cameras include an infrared

illuminator for viewing in the dark so as to ensure surveillance 24 hours on 24.

Connections and controls

Fixing cylindrical cameras - Cameras

cylindrical are equipped with an integrated bracket for wall mounting, specially designed to allow

the passage of cables inside it and protect them from tampering. The camera is mounted

generally in the output cables so as not to leave exposed wires. The fixing base has, however,

also with a slot lateral cable outlet if the cables come in laterally outer raceway. The bracket is

fastened to the wall or ceiling with the supplied dowels.

Fixing spherical cameras - The spherical cameras are composed from the camera and

from the mounting base which are screwed to each other. Prior to mounting, unscrew the base of

separating it from the camera body. No need for tools typically used to loosen the mounting base

from the camera body, however, if this proves too tight at the bottom it is possible to help placing

a rigid rod, for example a screwdriver, between the two outlet eyelets lateral cables placed in the

base. The fixing base, separate

from

camera is fixed to the wall or wall with

dowels

correspondence

of the

hole of cables exit and on

screws

subsequently

the

body

camera.

Before tighten properly orient the viewing angle.

BNC video output

At the BNC female bayonet

connecting the video cable that leads

then to monitor or DVR typically using

RG59 coaxial cable and BNC

connector. Yes they can

also

use twisted pair cables with balun

converters.

RE-RE-BCCxx DCCxx analog and AHD waterproof cameras with IR

fixing

DSE srl - Digital Surveillance Equipment -

WWW.DSE.EU

Document: RE-BCC DCC 1F7

Jack DC12V We must connect a 12VDC power supply stabilized by at least 1000 mA, such

as RE-AL4S model / C (not inclusive).

The requested plug is the standard 5.5 mm. Attention to use STABILIZED feeders that provide

12V in any load condition. The use of a different supply voltage from 12VDC can generate video

disorders and in the worst cases damage the camera. Beware extension power cables are too

long or

small section,

excessive fall

IR illuminator ignition.

Housing connections - The video connections and

power supply must be protected from the weather and housed in special electrical containers. For

this reason, the cameras are equipped with an integrated cable about 50 cm

length to reach the box which goes arranged nearby. For some camera models are

available as an optional accessory prolonged mounting bases to hold the connections inside.

Adjust zoom / focus - Cameras with

fixed lens (IR up to 20 m.) does not require focus as set at the factory for most applications. The

adjustable lens cameras are equipped with 2 external screws that allow to adjust the lens focal

length and the

the casing of the camera. Acting initially on ZOOM lives and

regular

(Wide / Zoom)

based on the area to be framed.

Remember that in most wide angle corresponds inevitably less image detail. Once you defined

the field of view act on the FOCUS screw to focus perfectly framed area. Recall that each lens

has its own depth of field to which it is possible to put in focus in a perfect way only a portion of

the space in front of the camera. Concentrate on the most important area to adjust the focus

optimally. CAUTION: The commissioning fire screws have a limit block that avoids to spill the

ferrules drive from their home. E 'need not force over the limit switch to avoid damage to the

adjustment mechanism.

Adjusting cameras with autofocus zoom - The

cameras with autofocus zoom does not have a local adjustment screw, as the objective is

controlled remotely via RS485 serial line. These cameras are equipped with two additional cables

which must be connected to the RS485 port of the DVR (CABLE BLUE = RS485 + / A CABLE

BROWN = RS485- / B) via a twisted pair. The communication protocol Pelco D is the standard of

all our tellecamere. The protocol parameters are factory ADDRESS: 1, SPEED '2400 baud. If you

install more than one camera of this type to the same bus, each camera must be set to a different

ID address. E 'can change address and speed in UTC menu of the camera (see below)

IR Illuminator

The cameras incorporate within them an infrared illuminator that emanates illumination invisible

to the human eye, but visible to the camera. The illuminator turns itself on when it gets dark and

the camera switches alone in night vision mode. The illuminator ignition allows the vision in B /

N in absolute darkness until its scope lighting.

Page: 1

that could

to introduce

species voltage at the time

fire without opening

the breadth

the frame