DSE SD-5 Series 사용자 설명서 - 페이지 6

{카테고리_이름} DSE SD-5 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSE SD-5 Series 15 페이지.

페이지 인쇄

USER MANUAL

SPEED DOME CAMERAS SD-xxx-5

Page:6

Select the video format AHD

CVI TVI CVBS

This cameras support AHD technology with 5MP

resolution

AHD technology is the latest evolution in analogue

CCTV. These AHD cameras, combined with the latest

generation AHD video recorders, provide megapixel

resolution, without latency, while maintaining all the

simplicity of installation of an analog system. In order

to use the AHD 5MP video signal you need a VCR that

supports this technology and this resolution.

If your DVR supports AHD 5MP there is no need to

change the video format of the camera. If not you can

change the video format of the camera to CVI, TVI or

even CVBS which is traditional analog video.

It is possible to switch by calling up the following

presets twice consecutively:

CVBS

Call preset 140 twice

AHD

Call preset 137 twice

TVI

Call preset 138 twice

CVI

Call preset 139 twice

ATTENTION - These control presets only work with

RS485 protocol, they do not work with UTC control on

video cables.

As an alternative to the signal switching presets it is

possible to switch the video signals in the camera OSD

menu which opens by calling preset 102 twice. In the

camera OSD menu it is also possible to change the

video resolution of the camera.

The camera OSD menu is explained later in the

manual.

Wall mounting

The SD series speed dome cameras are supplied with a

wall mount bracket. The camera cable in this case must

pass through the bracket. In the following photographs

the example of installation of the wall bracket

Fix the bracket to the wall using plugs, taking care

to leave the cables exit in the center between the fixing

holes.

The connecting cables pass through the bracket

Connect the camera and secure it to the bracket

with the supplied screws.