DSG Technology IM1200 관리자 설치 및 구성 매뉴얼 - 페이지 15
{카테고리_이름} DSG Technology IM1200에 대한 관리자 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSG Technology IM1200 20 페이지. Intermail voice mail system
페이지 인쇄FUNC2 Button to reset system parameters: This button allows you to reset
IP address, Administrator password as mentioned in FUNC1 and system
parameters to factory default. To reset, turn off the power. Press and hold
the FUNC2 Button and turn on the power. About 1 minute later system
booting will complete. Till you see the Power and Mode LED on, then you
can release the FUNC2 Button. The IP address, Administrator password
and system parameters will be reset to the factory default.
Power Indicator: The Power Indicator will be lit when the IM1200 has
power connected and is turned on.
Mode Indicator: The Mode Indicator will indicate which Operation Mode
the system is in at the moment.
- Green: Business Hours
- Amber: Break Hours
- Red: After Hours
- No light: Holidays
Link Indicator: The Link Indicator will be lit when the system is connected
to LAN.
L1-L8 Line Indicators: The Line Indicator will be on when the indicated
channel is being used.
Follow these steps to install IM1200:
1. Use the 2- or 4-wire phone cords to connect your phone system's station
ports to the jacks labeled L1/L2 to L7/L8 on the InterMail front panel. Plug
the RJ14-to-RJ11 line splitters come with the package to split the ports to 4 or
8 channels and end to your phone system's station ports.
2. Connect your Ethernet network with InterMail using a standard Ethernet
(UTP CAT-5e) cable to the RJ45 jack labeled ETHERNET on the InterMail
front panel.
3. Connect your power adaptor to the socket labeled PWR on the back panel of
InterMail.
4. Connect the Battery cable to a 12-volt battery if you wish to use a battery for
emergency power.
5. Turn on the power switch at the back of InterMail. Allow about 1 minute for
it to finish the boot cycle.
Installing InterMail - IM2400
The following is a schematic for the line configuration of IM2400 with other
devices.
Chapter 2 Installing InterMail
15