AirTime AT12RPS 설치 및 사용 설명서 - 페이지 6
{카테고리_이름} AirTime AT12RPS에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTime AT12RPS 6 페이지. Solar powered wall clock
AirTime AT12RPS에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (4 페이지)
페이지 인쇄Hanging the Clock – Surface Mount
AirTime wall clocks feature an innovative maze style mounting
bracket that prevents simple upward motion from removing
them from the wall.
Figure 1: 12 inch Surface Mount
1. Secure the supplied anchor and mounting screw into the
wall leaving the head exposed.
2. Slide the clock onto the screw head at the bottom of the
maze track.
3. Move the clock down, left, down and then right until it
rests securely at the top of the bracket.
4. To remove the clock, reverse the process above.
Patent Pending
Installation & User's Guide
Page 5
AirTime Solar Wall Clock
Hanging the Clock – Double Mount
The AirTime AT12RPSD is available for wall mount applications.
1. Install wall box (Fig. 2, #1)
2. Attach box adaptor plate (Fig 2, #2) to wall box with (4) #8-
32 x 1" screws (Fig 2, #3).
3. Attach the case assembly to couplings with recessed
flanged washers (Fig. 2, #4) and chase nipples (Fig. 2, #5).
Tighten all components securely.
Figure 2: 12 inch Solar Double Mount Assembly
4.
Slide one clock onto the lip of the double ring assembly and
secure using the 3 #4 x 1/4" screws at the 3, 6 and 9 O'clock
positions. (Fig. 2, #6)
a.
Install 1 CR123A battery in each clock and press the
Reset button on each clock.
Page 6
Doc. No. USG0080A