3nStar PPT205 사용자 설명서 - 페이지 6

{카테고리_이름} 3nStar PPT205에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3nStar PPT205 8 페이지. 58mm portable printer

3nStar Inc.

Self-test

Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait 3

seconds and then release both buttons at the same time. The printer will print its status and

settings

Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait

10 seconds and then release both buttons. The printer will print "Hexadecimal Dump" first,

then it will enter in HEX printing mode.

Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait 2

seconds, release the POWER button, 25 seconds after the printer's green indicator will flash

and the buzzer will ring. Release the FEED button.

At this point, initialization is complete. Press the POWER Button again to start using the printer.

Caution:

1. The printer will only work with the designated battery & power adapter. Using a non-

original battery or adapter may cause damage to the printer.

2. If the printer will not be used for a long period of time, the battery must be taken out of

the printer or it may cause battery leakage.

3. The battery fluid used in the printer battery is caustic. If the battery accidentally leaks

and the fluid makes contact with skin or clothes, please flush with running water

immediately. If the fluid gets into eyes, please seek immediate medical care.

4. The printer must not be put into water or exposed to rain or it will damage the printer.

5. Although the printer can work in environment temperature between 0°C to 40C, it may

affect printing quality if environment temperature is too low or too high.

PPT205 User Manual

5 |

P a g e