ATS Diesel Performance Aurora Plus - 5000 설치 매뉴얼 - 페이지 6

{카테고리_이름} ATS Diesel Performance Aurora Plus - 5000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATS Diesel Performance Aurora Plus - 5000 18 페이지. Aurora plus - 5000 turbo kit (2003-2007) 5.9l dodge

페이지 인쇄

to remove the thread lock punch. Do not use a drill bit larger than .125".

Drill deep enough to allow the clevis to break the lock on the threaded rod.

Do not drill completely through the rod.

4. After the thread lock punch is drilled out. Remove the clevis and thread

on the 5/16-24 lock nut supplied with the kit. Thread on the clevis, but

leave the lock nut loose to allow for adjustment later.

5. Remove the turbine housing by loosening the v-band clamp on the

cartridge. While wearing safety glasses, remove the compressor housing

using a large set of snap-ring pliers to release the internal snap-ring in the

housing rim. Adequate snap-ring pliers are available through ATS.

Turbine

Housing

Locating Pins

6. Remove the alignment pins from both sides of the cartridge. Discard the

alignment pins.

Cartridge

V-Band Clamp

Drill Here

Internal Snap Ring

Compressor

Housing