28 GORILLA 28-0010038 사용자 설명서

{카테고리_이름} 28 GORILLA 28-0010038에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 28 GORILLA 28-0010038 4 페이지. Ae wireless temperature sensor

AE Wireless Temperature Sensor

Version 1.0.0 - 4/22/2021

Product Overview

Items Included:

1. 1 - AE Wireless charging station (WCS)

2. 4 - AE Wireless Temperature Sensors (WTS)

3. 1 - AC Adapter

4. 1 - USB-A to USB-C charging cable.

The AE Wireless Temperature Sensor contains an infrared temperature sensor which is used to measure

and record the temperature of a surface. A User is able to place the device against a desired surface and

continuously monitor the temperature of the location. The sensor is able to record and wirelessly transmit

the temperature data to a mobile device.

Notes

In order for the User to access the information transmitted by the Wireless Temperature Sensor (WTS),

there is an accompanying AE mobile application that must be downloaded and used on a mobile device. The

mobile application allows the user to interface with the WTF and access WTS's internal information

wirelessly.

Operational Modes

The AE Wireless Temperature Sensor (WTS) contains two operational modes, and one sleep mode. The

first operational mode is charging, where the device is not performing temperature measurements and is

focused on charging the internal battery. While the WTS is charging, it will limit wirelessly accessible data to

the state of charge of the battery and charge status. This is reflected in the mobile application where the

user is able to see the status of the battery while temperature information is removed from view.

The second mode is normal operation mode. In this mode the WTS discharges from the internal

battery and performs periodic temperature readings from the surface directly in front of the infrared

temperature sensor. The data is collected and wirelessly transmitted to a mobile device. During this

operational mode the User is able to view within a mobile application, battery status information and

periodic temperature information.

The last operational mode is sleep mode. In the event the internal battery is discharged to a critical

level. The sensor will enter a sleep mode and will be unable to be detected or connected to wirelessly. It is

recommended when the device enters this sleep state that the User places the device on the charger

within 24 hours, in order to recharge the sensor's internal battery.