ATSC AT2016 사용자 설명서 - 페이지 7

{카테고리_이름} ATSC AT2016에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATSC AT2016 20 페이지.

1.1 Remote Control

AT2016

Remote Key Function:

1. MUTE: Press to mute or unmute the audio output.

2. GUIDE: Press to display the on-screen Electronic Program

Guide (EPG).

3. CH+: Press to change the channels in non-menu state.

4. CH-: Press to change the channels in non-menu state.

5. INFO: Press to display information about the channel being

viewed.

6. EXIT: Press to completely exit from the on-screen menus.

7. OK: While using the on-screen menus, press ENTER to

activate (or change) a particular item.

: Press to move around the menu screens

9. PRE-CH: Press to return to the previous channel you viewed.

10. - : Press to input dash to select a channel, for example 14-1.

11. CAPTION: When a digital signal is received, Service1,

Service2,... or Service6 can be selected. When an analog

signal is received, CC1, CC2, CC3, or CC4 can be selected.

12. AUDIO: Press to select the available multi-tracks.

(Depending on the particular broadcast, one or more

foreign language translations might be available.)

13. STANDBY: Press to switch the Atsc Converter Box to on

and off.

14. VOL+: Press to increase the output volume level.

15. VOL-: Press to decrease the output volume level.

16.

: Press to move around the menu screens

17. MENU: Press to display the main menu or to switch

back to the previous menu screen that was displayed.

18.

: Press to move around the menu screens

19.

: Press to move around the menu screens

20. NUMBER KEYS Press to directly tune to a particular

channel or input digits in menus.

21. ASPECT: Press to change the screen format (Normal/

Zoom/Wide/Cinema) according to the screen aspect ratio

and the input signal format.

22. SIGNAL: Press to show the signal strength.