Attache PID-100 사용자 설명서 - 페이지 7

{카테고리_이름} Attache PID-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attache PID-100 7 페이지. For notebook computers

• Brightness: This is for B/W mode only. The brightness value ranges

from -100% to 100%. It changes the highlight value of an image when

scanning in B/W mode.

• Contrast: Again the contrast value ranges from -100% to 100%.

• Gamma: The gamma value ranges from 0.1 to 9.9. It defines the mid-tone

point of an image. It is recommended to set the value to 1.0 or larger to

make the image brighter.

• Highlight: The highlight value ranges from 1 to 255. It defines the white

point of an image. You can reduce the value to make the image lighter or

increase the value to make it darker.

• Shadow: The shadow value ranges from 0 to 254. It defines the black

point of an image. You can reduce the value to make the image darker or

increase the value to make it lighter.

Note: It is recommended to set the shadow value lower than the high

light value.

Information Window

Useful information related to the Attaché and TWAIN driver software can

be found in this window.