ADDAC System ADDAC215 조립 설명서 - 페이지 4

{카테고리_이름} ADDAC System ADDAC215에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDAC System ADDAC215 13 페이지. Dual s&h+

ADDAC215 Assembly Guide

STEP 1:

Start by locating all 6 capacitors, notice the different values and orientation marked on the pcb.

Tip: soldering these caps is easy, just place a dab of solder on the pad on your right (left pad if you're

left handed) and then, with the help of a tweezer, put the capacitor in place and reflow the previously

tinned pad to reflow the solder while pushing the capacitor down. Then solder the other pad.

100uF

STEP 2:

Proceed by locating the 78L05 Regulator and solder it in place, notice the orientation printed on the pcb.

ADDAC SYSTEM

2.2uF

SLEW TIME

4.7uF Long

220nF Short

page 3