3nStar SC550 사용자 설명서

{카테고리_이름} 3nStar SC550에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3nStar SC550 2 페이지.

1. Scanner Overview

2. Connection Guide

1. Plug the RJ45 connector of the USB cable to the

host interface on the omni directional barcode

scanner.

2. Connect the other end of the USB cable to an

available USB port on the Host device.

3. Connect the external power supply (5V DC

adapter) to the USB cable.

4. Switch on the host device. If properly connected,

the omni directional scanner will confirm with a

buzzer sound and LED light.

1. Plug the RJ45 connector of the RS-232 cable to

the host interface on the omni directional barcode

scanner.

2. Connect the other end of the RS-232 cable to

the port on the serial port (DB9) on the Host device.

3. If the host does not have a power supply (on

DB9), connect the external power supply (5V DC

adapter) to the RS-232 cable.

4. Switch on the host device. If properly connected,

the omni directional scanner will confirm with a

buzzer sound and LED light.