3ntr A4 V2 빠른 시작 매뉴얼 - 페이지 17

{카테고리_이름} 3ntr A4 V2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3ntr A4 V2 20 페이지. 3ntr a4 v2 3d printer quick start

Be sure you are running the latest firmware release

It is always better to have your machine running with

latest firmware: you get better performances and better

prints!

To assess wich firmware is loaded on your printer, use

Repetier Host (or any other printer management app,

that can show printer return codes) :

Fig 10: Send the M505 command

the one currently available on your website, you should seriously consider

upgrading. It'FREE and it will surely improve your product usage. On first batch

machines, this command doesn't work: therefore it's one more reason to

upgrade!

Fig 11: Firmware version loaded on your

printer

Fig 9: Be sure to have your log ON !

1. Connect printer to your

PC, turn both ON, then

start Repetier Host.

2. Be sure to have your

log ON (Fig.9), to show

printer return codes on

the lower screen area

3. Use the "manual

control" tab to send the

M505 command to the

printer

4. The printer should

return the current

loaded version (in Fig

11, is is 18.08.14)

5. If the firmware in your

machine is older than