Attainment Company StepPad 사용자 설명서 - 페이지 14

{카테고리_이름} Attainment Company StepPad에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attainment Company StepPad 18 페이지.

Adding a New Step Within an Sequence

You can add a new step to an existing sequence without affecting the other recordings .

1 . Press and release the REC button on the back of the device . A solid

record mode .

2 . Press the Activity button linked to the desired step-by-step sequence .

3 . Press the Next button until you hear the step that will precede the new recording .

Note: New recordings always follow preceding steps without erasing subsequent steps.

4 . Press and release the Play button and the

about eight inches from the StepPad .

5 . Press and release the Play button when you're done recording the new step . The LED will return to

solid red .

Note: To hear the new step press and release the Volume Up or Volume Down button.

6 . Press and release the REC button on the back of the device TWICE to exit the record mode .

red

LED will flash . Begin recording by speaking clearly,

red

LED indicates you are in the