DSPPA MAG6801 사용자 설명서 - 페이지 8

{카테고리_이름} DSPPA MAG6801에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSPPA MAG6801 16 페이지. 1 channel network audio terminal

Fire/Public Address System

2.2 Introduction to functions on rear panel

1. Indicating LED setting

Each channel corresponds to an indicating LED on the panel which is on when the corresponding

channel is in setting mode.

2. Setting switch

This switch is a software switch for setting of the device and each button represents a channel, so the

user can set set up the channel by operating the corresponding switch.

3. Network indicating LED

This LED is on when the device is connected to the controller via network.

4. Network interface

This device provides two network ports for connection to network switch(es).

5. Override input

Connect the source device (such as DVD player, etc.) to expand the audio source.

6. Input level Adjustment

Adjust the knob according to the level of the input audio signal.

7. Break-in link output

It is for connection to other terminals, with up to 4 terminals allowed.

8. Audio output port

This device is a single-channel audio output terminal and only CH1 out of the four channels is available,

with all others disabled. Corresponding indicating LED is on when there is signal output. This port is for

connection to other amplifiers to extend the power of this terminal.

9. Warning output

1-2 COM-24V (Connected to the network host, CH1 output is controllable, 24V total current is 1A)

1-3 COM-SC (Connect to the network host, CH1 short-circuit output is controllable)

10. Power socket

The device provides an AC 220V power input port, please connect the power cable to the device before it

is connected to any power source.

1 Channel Network Audio Terminal

Network Address System

MAG6801