Attend 100 조립 및 설치 매뉴얼 - 페이지 7
{카테고리_이름} Attend 100에 대한 조립 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Attend 100 16 페이지.
페이지 인쇄When crossing an obstacle, its height MUST NOT be higher
than the wheel's radius. If the obstacle is higher than the
wheel's radius, the wheelchair has to be lifted.
Brakes
Model 100
Pull the brakes by pressing
A
down with your foot.
To release the brakes, lift up
A
with your foot.
• These brakes must not be used to slow down the wheelchair.
• Check that the brakes are not in contact with the wheels
when in motion.
Front and Rear Wheels
Model 150
• Front wheels with tyre width of 200 mm.
• Rear wheels with tyre width of 300 mm.
Always check that the wheels are free of dirt before
using the wheelchair.
Check that the tyres are not worn before using the
wheelchair. Replace them when necessary.
When crossing an obstacle, its height MUST NOT be
higher than the wheel's radius. If the obstacle is higher
than the wheel's radius, the wheelchair has to be lifted.
A
7