Attenti AT1 사용자 설명서 - 페이지 6

{카테고리_이름} Attenti AT1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attenti AT1 8 페이지. 1-piece offender

Responding to Vibrations/Flashing LEDs

The device will vibrate three consecutive times if an alarm has been generated. View

the flashing LED(s) on the top of the device and follow the below steps to clear the

alarm.

Red

PWR

The device battery is low. Connect the device to the charger.

Once the device is fully charged, it will vibrate once and the PWR LED will be solid

green. Disconnect the device from the charger.

Note: The 1-Piece must be charged for a minimum of 2 hours per day.

Red

GPS

The device has lost GPS. Walk outside with the device uncovered and ensure that you

are in an area with a clear view of the sky (do not stand under trees, building awnings,

etc.).

When the device reacquires GPS, the GPS LED will stop blinking.

Red

Zone

You are either in a forbidden area (for instance, a school zone) or not in a location

where you are scheduled to be (for instance, work).

If you are in a forbidden area, leave the area immediately.

If you are not in the scheduled location, travel to that area as quickly as possible.

When the alarm has cleared, the Zone LED will stop blinking.

Red

PWR, GPS, ZONE

Your officer has sent an alert requesting that you contact them as soon as possible.

Press the Acknowledge button on the top of the device. The PWR, GPS, and ZONE LEDs

will stop flashing.

1-Piece (AT1) Offender User Guide