Attero Tech AXON A4FLEX 사용자 설명서 - 페이지 12
{카테고리_이름} Attero Tech AXON A4FLEX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech AXON A4FLEX 13 페이지. Networked audio connectivity interface
페이지 인쇄4
– ARCHITECTS & ENGINEERS SPECIFICATION
The networked audio interface shall provide the ability to interface up to 4 microphone or line-level inputs to an AES67 audio network and
remote AES67 enabled audio devices.
Two of the mic/line inputs shall support selectable direction via software.
The device shall also provide 2 speaker level outputs for driving low impedance speakers.
The device shall support an integrated Ethernet switch for daisy chain connectivity to additional units via the network, as well as the option
to daisy chain DC power.
The device shall provide 4 5V tolerant, 3.3V level open collector logic inputs , with 8 logic outputs for driving external LEDs or logic controlled
devices.
The device shall provide the ability to interface USB digital audio from a connected device to and from an AES67 network.
The AES67 networked audio interface shall support transmission and reception of 8 independent channels in both directions at 48 kHz, 24-
bit with 1 ms packet times.
Internal DSP on the device shall support signal mixing of all I/O, equalization and output limiting.
The device shall support surface mounting and rack mounting with optional accessories.
The unit shall accept either IEEE 802.3af/802.3-at standard PoE/PoE+ from an IEEE 802.3af/at PoE/PoE+ compliant network switch or mid-
span injector.
The unit shall include a software plugin for simple interfacing with QSC Q-SYS based DSP systems.
The network control interface shall be compliant with the RoHS, WEEE and REACH directives.
The network control interface unit shall be Compliant with the EMC/ESD requirements for FCC and CE.
The unit shall be the Attero Tech, Axon A4FLEX product.
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
Page i