Attero Tech SquawkBox 사용자 설명서 - 페이지 15

{카테고리_이름} Attero Tech SquawkBox에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech SquawkBox 20 페이지.

For dynamic assignment, a DHCP server that supports BOOTP is preferable. Control Center can be used as a temporary

solution but Control Center, on its own does not provide any facility to update the SquawkBox firmware (a BOOTP server is

required to do that). While a BOOTP server provides a subnet mask that's configurable on the server, Control Center cannot.

Instead, it relies on the SquawkBox itself to define a subnet mask based on the IP address it has been given as follows:

*Note: It is recommended on large system of 250 or more SquawkBoxes to use either a BOOTP server or set static IP

addresses.

*Note: Any SquawkBox that is reset or powered off will lose its dynamically assigned address. It will attempt to get another

one when it turns back on so whatever mechanism is used to supply an IP address must be running all the time.

*Note: Any SquawkBox not assigned an appropriate IP address and subnet mask will not respond to override requests

Attero Tech LLC 2014

IP address range

1.0.0.0 through to 127.254.254.254

128.0.0.0 through to 191.254.254.254

192.0.0.0 and greater

Subnet used

255.0.0.0

255.255.0.0

255.255.255.0

Page 11

SquawkBox

User Manual

614-00007-04