Attero Tech unD32 BoB 사용자 설명서 - 페이지 8

{카테고리_이름} Attero Tech unD32 BoB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech unD32 BoB 19 페이지. 32 channel dante break out box

unD32 BoB

User Manual

2.3 – Audio Connections

The unD32 unit comes shipped with 32 Phoenix style, screw down, connectors pre-installed into the 32 audio output

connector ports.

2.3.1 – Balanced Destination

To connect a balanced input on a destination device to an unD32 output, connect the positive and negative connections

of both the unD32 output and the destination devices input respectively. Use the shield of the cable to connect the two

GND pins together. If the cable does not have a shield, use a free internal core instead.

Figure 4 - unD32 Output to Balanced Destination

2.3.2 – Single Ended Destination

To connect a 2-wire unbalanced input to an unD32 output, connect the positive input of the destination device to the

positive output of the unD32. Connect the GNDs together through the cable shield. If the cable does not have a shield,

use a free core instead. Leave the unD32 negative output floating.

Figure 5 - unD32 Output to Single Ended Destination

Page 7

614-00012 Rev 02