Attero Tech Zip4 사용자 설명서 - 페이지 15

{카테고리_이름} Attero Tech Zip4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech Zip4 16 페이지. Ip audio 4-button paging station

ARCHITECTS & ENGINEERS SPECIFICATION – (Zip4)

The Dante/AES67 paging interface shall have four zone selection buttons, four zone status bi-color LEDs and system "Ready" and "Busy" bi-

color status LEDs. The user interface shall have a variable brightness backlight. Button state monitoring and LED state setting shall be

accomplished via software over the Dante™ or AES67 network.

The microphone/PTT input shall be RJ-45 with strain relief provided. Two microphone gains, +25dB with automatic phantom power and

+35dB, shall be switch selectable. The internal analog to digital signal conversion shall be performed at 24‐bit resolution with a sampling

frequency of 44.1 kHz or 48 kHz. The Dante™ interface unit shall receive power over the Ethernet cable from an 802.3af PoE compliant

network switch. The Dante™ interface shall be wall mounted in a standard US dual gang junction box (Zip4).

The Dante/AES67 paging interface shall be compatible with the QSC Q-SYS PA Router software running on a Q-SYS Core series DSPs and

configured with dedicated Q-SYS Designer control plugin. The Dante/AES67 paging interface shall be compliant with the RoHS directive. The

Dante/AES67 paging interface unit shall be compliant with FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class

A and EN55024 Class A).

The Dante/AES67 paging interface shall be the Attero Tech Zip4.

ARCHITECTS & ENGINEERS SPECIFICATION – (Zip4-3G)

The Dante/AES67 paging interface shall have four zone selection buttons, four zone status bi-color LEDs and system "Ready" and "Busy" bi-

color status LEDs. The user interface shall have a variable brightness backlight. Button state monitoring and LED state setting shall be

accomplished via software over the Dante™ or AES67 network.

The microphone/PTT input shall be RJ-45 with strain relief provided. Two microphone gains, +25dB with automatic phantom power and

+35dB, shall be switch selectable. The internal analog to digital signal conversion shall be performed at 24‐bit resolution with a sampling

frequency of 44.1 kHz or 48 kHz. The Dante™ interface unit shall receive power over the Ethernet cable from an 802.3af PoE compliant

network switch. The Dante™ interface shall be mounted or a standard US triple gang box or enclosure.

The Dante/AES67 paging interface shall include a panel mounted 3-pin XLR microphone jack and LED illuminated panel mounted PTT switch.

The Dante/AES67 paging interface shall be compatible with the QSC Q-SYS PA Router software running on a Q-SYS Core series DSPs and

configured with dedicated Q-SYS Designer control plugin. The Dante/AES67 paging interface shall be compliant with the RoHS directive. The

Dante/AES67 paging interface unit shall be compliant with FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class

A and EN55024 Class A).

The Dante/AES67 paging interface shall be the Attero Tech Zip4-3G.

1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260) 496-9668 ⁞ www.atterotech.com

Page 15