DST FPV01 사용자 설명서 - 페이지 9

{카테고리_이름} DST FPV01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DST FPV01 11 페이지.

DREAM SOURCE TECHNOLOGY CO.,LTD

Charging steps

1) Plug the USB charging cable into the 5V charger.

2) Insert the Mico USB charging cable into the FPV power supply box charging

connector.

3) The red light indicates that it is charging, the green light indicates that the battery

is full.

Precautions for use of power supply box

When charging, you must place the FPV power supply box in a dry and ventilated

place, away from heat source and flammable and explosive items.

When charging, you must shut off the power box switch first， then remove the

power supply box from FPV goggles. The process of charging must be watched

to prevent accidents.

When you just finish using FPV goggles and the surface temperature of the built-

in battery is uncooled, please do not charge it immediately, otherwise it will cause

the battery to bulge or a fire.

Before charging, please ensure correct polarity.

In the charging process, avoid fall and external shock, otherwise it will cause

internal short circuit of the battery and danger.

When charging is completed, please pull out the USB charging cable in time,

away from the high voltage power supply.

To ensure the safety of your use, please do not disassemble and modify the power

box.

11.Precautions

For optimal performance, please choose channels with minimum interference.

Before use, please debug the effective range of image transfer and remote

control. Some receiving ends will be interfered by the electronic

transmitting/receiving components around, so try to keep enough space in order

to prevent mutual interference.

Ensure there is no obstacle between the transmitting antenna on the aircraft and

FPV goggles, and make the antenna away from the body as far as possible.

Beginners should fly in the familiar and larger space, to ensure safety.