DStv Drifta 빠른 매뉴얼 - 페이지 3

{카테고리_이름} DStv Drifta에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DStv Drifta 5 페이지. Mobile decoder
DStv Drifta에 대해서도 마찬가지입니다: 빠른 매뉴얼 (5 페이지)

About DVB-H

DVB-H is a technology that delivers video to mobile devices at a resolution of 320 by 240 pixels. It uses a

terrestrial broadcast, similar to radio, unlike the satellite technology used for your DStv service at home.

This means that you can enjoy Mobile TV on the move when in a DVB-H broadcast coverage area.

Resetting the Drifta

The Drifta can be paired with up to 10 devices; however, only one device can be used to view Mobile TV

at a time. If the device has reached its pairing limit, or is experiencing errors, reset the Drifta as follows:

1. Turn on the Drifta and wait until the DVB-H light goes steady green.

2. While pressing and holding the power button, press and release the reset button.

3. Release the power button.

4. The DVB-H light will icker rapidly. This indicates that the Drifta has been reset.

5. You can then follow the connect procedure.

Before using the Drifta

Charge the battery

The Drifta comes with a removable rechargeable battery. When using the Drifta for the first time, insert

the battery into the back of the Drifta and charge the battery. This is done by connecting the Drifta via

the USB cable to the USB port of a PC or a USB power adaptor. Take note of the power light during

charging. A full charge will take about 60 minutes. A fully charged battery gives about 3 hours of viewing.

Activate your Drifta

Your Drifta needs to be activated before using the service. Please contact MultiChoice Customer Care to

activate your device.

South Africa:

+27 11 289 2222

Ghana :

+233 302 740 540

Kenya :

+254 20 444 9000

Namibia :

+264 61 270 5222

Nigeria :

+234 1 270 3232

Install the Application

Install the Drifta client application on your viewing device by following the relevant instructions in this

quick guide

More Information

For more information, updated applications, and additional Drifta client software, please visit