DStv 5-1 사용자 설명서 - 페이지 12
{카테고리_이름} DStv 5-1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DStv 5-1 17 페이지.
페이지 인쇄
- 1. Product Overview
- 2. LNB Requirements
- 3. Connecting the Inputs from Your Satellite Dish
- 4. Twin LNB Connection Diagram (IS20 Only)
- 5. Twin LNB Connection Diagram (E36B Only)
- 6. Quad LNB Connection Diagram
- 7. 3 Cable Quad LNB Connection (E36B Angola and Mozambique Only)
- 8. Quattro LNB Connection
- 9. Connecting the Switch to Your Decoder(S)
- 10. Connecting the Dstv Switch (5-1) to One Dstv Explora
- 11. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (IS20)
- 12. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B Angola and Mozambique Only)
- 13. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B)
- 14. Connecting the Dstv Switch (5-1) to One Dstv Explora and One to Four Single View Decoders
- 15. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 2 Tuner Decoder
- 16. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 4 Tuner HD PVR
Connecting the DStv Switch (5-1) to one
DStv Explora and one to four Single View Decoders
Use any
one of the
outputs.
• Once the switch has been connected to the satellite dish,
• Then connect the outputs labelled 1 to 4 on the switch to the
10
H/L
V/L
1
2
use the supplied cable and connect output A or B on the
switch to the input labelled UNICABLE™ IN on the back of
your DStv Explora.
satellite inputs on the back of the Single View Decoder(s).
H/H
V/H
A
B
3
4
Single View Decoder(s)
DStv Explora
DStv Switch - User Guide