DSW DPS28F 사용자 설명서

{카테고리_이름} DSW DPS28F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSW DPS28F 5 페이지. Infrared motion sensor

INFRARED MOTION SENSOR DPS28F

SUMMARY

DPS28F has 3 high-sensitivity detectors, it adopts IC, LED numeric display

and SMT technology; the 3 detectors compose wide detecting range; it use

infrared energy form human body as its control source, when one enter its sense

range, it can start controlled load(for example: lamp); after leaving the range, the

load will go out automatically within set time.

DPS28F has remote controller, the controller can remote control the DPS28F

30m away from controller.

We can add new function for you and produce it according to your

requirement. Hope our product will take you convenience.

SPECIFICATION

Power source: 100V/AC~130V/AC

220V/AC~240V/AC

Power frequency：50~60Hz

power source(emitter):DC12V

emit frequency:433MHz

Light control: <3LUX~>1000 LUX (adjustable)

Sense distance:4m~10m(adjustable)

Rated load: 1200W（220V/AC~240V/AC）

800W（100V/AC~130V/AC）

Time delay（normal mode）:0sec~999sec(adjustable), default:8sec

Sense time interval( impulse mode）:0sec~999sec(adjustable), default:

50sec

FUNCTION

accurate LED numeric display time-delay function: it can be accurate

to sec, 1sec~999sec for your choice, operation simple and using

convenient;

impulse mode is another new function, when one enters its sense

range, it will start load to turn on 0.5sec, that give effect of alert signal.

in this mode, the sense time interval is adjustable, default is 50sec，

SET TIME button: used to set time, the details is in SET TIME WAY.

switch: convert NORMAL mode and IMPULSE mode;

SENSE LED;

sensitivity(SENS) is adjustable；

USER'S MANUAL

Sense angle:360°

Remote control distance:30m(wide place)

Working temperature：-20℃~40℃

Relative humidity：<93%RH

Install height：1.5m~3.5m

Power consumption：Working 0.45W(static 0.1W)

Sense motion speed：0.6~1.5m/s