DT DT SCREENS Dynamic 2S 설치 매뉴얼 - 페이지 10

{카테고리_이름} DT DT SCREENS Dynamic 2S에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT DT SCREENS Dynamic 2S 12 페이지.

Direction of fabric Tucking Fig.10

•

Continue this process until you reach the corners of the screen. You may have to pull out the

original tucks in the top left and right corners and re-tuck them to ensure that you have no

wrinkles in the fabric.

Ensure that you are happy that the fabric is flat and wrinkle free.

•

Using sharp scissors cut the excess fabric off on the outside of the fabric retaining track

leaving a 15mm – 20mm excess.

Work around the screen to push this excess down into the fabric retaining track. It is best to

•

do this in the same manner as the original tucks working out from the centres until all the

excess is tucked in.

•

Now repeat the exact same process you have just done for the black backing to install the

white projection fabric. Ensure that you have the 'FACE SIDE' label of the fabric facing out in

the room as this will be the side the projector will project onto.

Ensure that you use the white cotton gloves to handle the white projection fabric at all times

and keep it away from dust or dirt as it can easily be marked.

Dynamic 2S Installation Manual – V0.2