AddBike U-Cargo 기능 점검 지침 - 페이지 3

{카테고리_이름} AddBike U-Cargo에 대한 기능 점검 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AddBike U-Cargo 3 페이지.

Then check the tightness of the handlebar to the stem. Fasten the front brake

and swing the bike back and forth. The handlebars must not move. If it moves,

tighten the 4 screws that hold the handlebars to the stem. If you still feel some

mouvement in the head tube, tighten screw A (see figure below).

If in doubt, contact your bicycle dealer.

Then lock the front wheel by turning the handlebar. If the handlebar turns but

the front wheel does not, the bolts B must be tightened (see figure below).

Check your tyre pressure. It

should be between 3.0 and 4.0

bar. If you plan to drive with a

load, you should pump your

tyres to 4.0 bar.

Check the tightening of the

saddle. The saddle should be

straight and in line with the

bike. If it moves, open the

saddle clamp and retighten

the knob.

Have fun with your U-Cargo!

Screw A

Screw B