ATTO Technology Celerity FC-82EN 설치 및 운영 매뉴얼 - 페이지 12
{카테고리_이름} ATTO Technology Celerity FC-82EN에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATTO Technology Celerity FC-82EN 20 페이지. Celerity fibre channel host adapters
ATTO Technology Celerity FC-82EN에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 브로셔 (14 페이지), 선택 매뉴얼 (1 페이지), 문제 해결 매뉴얼 (5 페이지), 사양 시트 (2 페이지), 시작하기 매뉴얼 (2 페이지)
페이지 인쇄
Before installing your Celerity adapter, you must configure your system to recognize and use it by installing drivers
for your operating system.
Your adapter was properly flashed before shipment.
However, you must add Celerity drivers to your
computer before continuing with installation.
If you already have one or more Celerity adapters
installed and you have the latest drivers found on the
ATTO website, or you followed the instructions in the
Getting Started Guide, you do not need to perform any
of these procedures.
Downloading drivers from the ATTO website
Use this procedure if you need to update drivers. The
latest driver for your adapters can be found on the
ATTO website.
1
Go to www.attotech.com.
2
On the home page menu, put your cursor over
SUPPORT then click on Downloads.
3
Register or log in if previously registered.
4
Select Fibre Channel HBAs from the product
list.
5
Select your model.
6
From the table, find your Operating System.
Windows
Installing from the ATTO Technology
website
1
Power on your system.
2
Log on to Windows as the system
administrator.
3
Locate the ATTO driver on your system and
click unzip. The driver files are extracted and
the driver installer is launched.
4
If you have User Account Control enabled,
you are asked for permission for the installer to
continue. If you do not have administrator
privileges, you are also asked for an
administrator user name and password. Fulfill
the required fields and click Continue.
5
Click Install.
6
Follow the on-screen instructions to complete
the driver installation.
7
Continue on to
Install
8 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual
2 Install Drivers
Hardware.
Drivers are provided on the ATTO website. at
http://www.attotech.com/downloads.php. Log in, if
previously registered, or register to proceed to the
download pages. Once downloaded, continue with
the driver installation procedures (below) for your
operating system.
7
Click on the entry for the latest driver.
8
A download window appears. Follow the
instructions for downloading the driver.
Internet Explorer users may select Run to
automatically run the downloaded self-
extracting executable file.
All other browser users select a download
destination and run the self-extracting
executable file.
Continue with the driver installation as described on
the following pages for your Operating System.
Installing from a directory containing the
Celerity driver
1
Power on your system.
2
Log on as the system administrator.
3
Navigate to the directory containing the Celerity
driver.
4
Run Setup.exe.
5
Click Install.
If you have User Account Control enabled,
you are asked for permission for the installer to
continue. If you do not have administrator
privileges, you are also asked for an
administrator user name and password. Fulfill
the required fields and click Continue.
6
Follow the on-screen instructions to complete
the installation.
Note
Continue on to
Install
Hardware.