DT Research DT370CR 기본 작동 매뉴얼 - 페이지 5

{카테고리_이름} DT Research DT370CR에 대한 기본 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT Research DT370CR 8 페이지. Mobile tablet
DT Research DT370CR에 대해서도 마찬가지입니다: 기본 작동 매뉴얼 (4 페이지), 기본 작동 매뉴얼 (4 페이지)

페이지 인쇄

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed

after a launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be

established.

Configuring the Mobile Tablet

The DT370CR may be configured using the utilities and methods dictated by the software operating system.

The DT370CR should be configurable for various properties such as user profiles, network features, and

several system elements.

Wireless Networking

Wireless LAN

The DT370CR is often delivered with an embedded (user‐inaccessible) 802.11ac WLAN adapter equipped with

a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT370CR should be able to detect all 802.11 access

points in the vicinity for you to select the access point of your choice for connection.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT370CR and the access points have to

match. The SSID is case‐sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or

advanced alternatives) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your

networking equipment literature to properly configure associated settings such as Authentication mode,

etc.

• Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility

Center. Follow the instructions and options provided within the application to configure and invoke

Bluetooth connectivity with the corresponding peripherals.