ATTO Technology FastStream SC 5300 설치 매뉴얼 - 페이지 2

{카테고리_이름} ATTO Technology FastStream SC 5300에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATTO Technology FastStream SC 5300 6 페이지. Storage controllers for audio
ATTO Technology FastStream SC 5300에 대해서도 마찬가지입니다: 기술 사양 (2 페이지), 브로셔 (14 페이지), 핫 시트 (2 페이지), 선택 매뉴얼 (1 페이지), 선택 매뉴얼 (1 페이지), 상호 운용성 매트릭스 (1 페이지), 성능 벤치마크 (2 페이지), 기능 및 이점 (2 페이지), 사양 (2 페이지)

ATTO Technology FastStream SC 5300 설치 매뉴얼

Discover the IP address

1
Open the QuickNAV-windows.exe program
found in the Utilities directory on the CD
supplied with your FastStream SC 5300.
2
The ATTO QuickNAV Wizard screen appears.
Click Next.
3
Highlight the ATTO FastStream SC 5300 serial
number. Refer to
Verify the contents of your
packing box
on page 1.
4
Click Next.

Initial configuration

CAUTION
CAUTION
Selecting Commit during configuration
causes all previous storage data on drives
to be erased. Make sure data is backed up.
1
At the initial welcome screen for your ATTO
FastStream SC 5300 in your web browser click
on Enter Here.
2
Enter the username and password in the login
box. Default values are
• Username: root
• Password: Password.
Passwords are case sensitive.
3
Click OK
4
At the Initial Setup screen, choose the Avid
Digital Video button.
5
Click Next
N ote
The FastStream SC 5300 supports
configurations of 6, 12 or 24 JBOD drives. The
drives should be attached to the FastStream
SC 5300 and powered on.
...................................................................................
2.
N ote
If a DHCP server is not available on your
network, refer to the Installation and Operation
Manual for further instructions.
5
Click on Launch Browser. The FastStream SC
5300 GUI initial welcome screen appears.
6
All of your drives are displayed graphically on
the ATTO Digital Video Setup Wizard page.
If no drives are present, make sure your drives
are powered on and attached to the
FastStream SC 5300, then click the System
Scan button. If you do not see 6, 12 or 24
drives, consult the Installation and Operation
Manual.
7
Click on Commit
8
A warning asks to confirm your choice: setting
up RAID groups destroys existing data.
Select No to cancel the setup and return to the
initial setup page.
Select Yes to set up RAID groups.
Configuration may take more than two hours.
N ote
Once the initial setup is complete, close your
browser and configure the RAID protected
storage in your specified operating system.
Refer to the Monitor page periodically to note
system health.
© 2007 ATTO Technology Inc. PRMA 000-0365-000
.