DT Research DT1363 기본 작동 매뉴얼 - 페이지 2

{카테고리_이름} DT Research DT1363에 대한 기본 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT Research DT1363 2 페이지. Embedded controller/system

페이지 인쇄
DT Research DT1363 기본 작동 매뉴얼
DT1363
Precautions
•
Always exercise care when operating and handling the DT1363.
•
Never disassemble any portion of the enclosure as this will void any product warranty on the DT1363.
•
Do not use any AC/DC adapter other than the one provided with the DT1363 or acquired from
the manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power
down the DT1363 and disconnect all power sources.
•
Please report the problem to your device provider immediately.
The DT1363
Front View
A
B
Audio jack
A
B
USB 3.0 ports
C
Power button
DC-in
D
NOTE: If you are connecting an DT1363 player to ONLY ONE screen, do not use its A0 port. Instead,
you can use the A1 or A2 port.
2
ENGLISH
Rear View
C
D
E
F
G
1920 x 1080 @ 60Hz
HDMI (A0)
(Hot-plug not supported)
3840 x 2160 @ 24Hz
HDMI (A1)
E
1920 x 1080 @ 60Hz
3840 x 2160 @ 24Hz
HDMI (A2)
1920 x 1080 @ 60Hz
Ethernet ports
F
USB 2.0 ports
G
Powering ON and OFF
The Power Button is located in the front of the DT1363. The Power Button may be configured to
function differently depending on the power options of the operating system. In general, to turn the
DT1363 on, push and release the Power Button on the front bezel. The power LED will be lit (blue)
and the corresponding interface will be displayed on the display monitor.
To turn off the device, again depending on software operating system, push and release the Power
Button or use a software shutdown interface. In the event of system lockup, the Power Button may
be used to perform a reset on the device. To do that, push and hold the Power Button for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Button
again will restart the device.
Device Ports
The DT1363 features an optimal set of I/O ports while preserving the compact size of the system.
The HDMI connectors, network (10/100/1000 BaseT Ethernet), and power ports are supplemented
by a set of USB (4) and audio (1) ports. Through its USB ports, the DT1363 supports a wide range
of USB-based peripherals, applicable in providing the means for software installation, application
storage, data storage, and system software recovery and updates.
Memory and Storage
The DT1363 may be available in storage configurations ranging from 32GB to 512GB Flash.
Depending on base software configuration, the user may use the internal memory of the DT1363
for user's installed software and storage. The user may also supplement storage space with USB-based
peripherals such as flash disks. RAM capacity is from 4GB to 8GB.
3
ENGLISH