ADDC MOBYL DATA CENTER 핸드북 - 페이지 8

{카테고리_이름} ADDC MOBYL DATA CENTER에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDC MOBYL DATA CENTER 11 페이지. Mobyl data center

Power Up/Down

/Fail Over

Press the main power button,

labeled MAIN PWR, to turn the

MDC22 on. If plugged into AC

or DC power, the batteries will

begin to charge (if installed). In

the event of power loss from

either the AC or DC power

inputs, the BioDigitalPC

/Mob-

ylPC cards will continue running

if the batteries are installed and

sufficiently charged.

Press the server power

button, labeled SERVER PWR,

to turn on the fans and the Bio-

DigitalPC

/MobylPC cards. Hold

the server power button for

approximately three seconds to

turn off the server power.

Press and hold the MAIN PWR

button for approximately three

seconds to turn off the MDC22

completely. This will stop the

batteries from charging (if bat-

teries are installed). Failure to

turn main power off may result

in the batteries slowly draining

(if installed).

Battery

DC Power

AC Power

Backplane Voltage Output Display

The MDC22 has a backplane voltage display to ensure

the power control is working properly. The reading

should be between 4.8 and 5.3 at all times. If the

reading is not at acceptable levels the MDC22 will

not work properly. Please ensure that you have the

proper input power levels in the appropriate AC/DC

inputs.