DT SWISS RATCHET EXP 기술 매뉴얼 - 페이지 19

{카테고리_이름} DT SWISS RATCHET EXP에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT SWISS RATCHET EXP 20 페이지.
DT SWISS RATCHET EXP에 대해서도 마찬가지입니다: 유지 관리 매뉴얼 (13 페이지)

페이지 인쇄

2.15 PUTTING ON THE FREEWHEEL BODY AND THE END CAPS

1. Put the freewheel body onto the hub.

2. Check if the freewheel body can be turned

and if the ratchets are engaging.

3. Grease both bearings and the inner side of

both end caps.

4. Put on the left and the right end cap.

→ The shorter adapter must be placed on

the drive side.

2.16 CHECKING THE FUNCTION

1. Turn the freewheel body in both directions.

→ The freewheel body can be turned

counterclockwise smoothly.

The ratchets engage audibly and

perceptibly.

→ The freewheel body cannot be turned

clockwise.

2. Check the end caps for tight fit.

→ The end caps are firmly seated on the

axle and are completely pushed on.

Ratchet EXP - Technical Manual