DT SWISS Ratchet LN 기술 매뉴얼 - 페이지 11

{카테고리_이름} DT SWISS Ratchet LN에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT SWISS Ratchet LN 19 페이지.
DT SWISS Ratchet LN에 대해서도 마찬가지입니다: 기술 매뉴얼 (16 페이지)

페이지 인쇄
DT SWISS Ratchet LN 기술 매뉴얼

2.9 CLEANING AND CHECKING ALL PARTS

1. Thoroughly clean all parts of the hub. The existing grease must be completely removed from the hub
body and from the ratchets.
2. Check the ratchets for wear.
The wear of the ratchets usually starts at the outer
circumference and shows itself by strongly flattened
edges with uneven wear.
In case of heavy wear, the ratchets must be changed
immediately.
3. Check the internal teeth of the freewheel body for
wear.
If the black surface of the gearing is heavily worn (no
longer black but silver), if there are burrs or if material
has been removed, the freewheel body must be
replaced.
Ratchet LN - Technical Manual
11