Boum BM1300 Series 범용 설정 지침

{카테고리_이름} Boum BM1300 Series에 대한 범용 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Boum BM1300 Series 2 페이지.

Universal Setting Instructions

__________________________________________________________________________________________________

A. Non-Calendar Watches:

1) Pull the crown out.

2) Rotate the crown until the current time is displayed.

3) Push the crown in to commence timekeeping.

B. Date Calendar Watches (BM1300 series):

1) Pull the crown out two clicks.

2) Rotate the crown counterclockwise until the date indicator advances once.

3) Rotate the crown clockwise until the current time is displayed.

- To set for am hours do not advance the hour hand past the 12 o'clock position.

- To set for pm hours advance the hour hand past the 12 o'clock position once.

4) Push the crown in one click.

5) Rotate the crown clockwise until the date indicator displays the correct value.

6) Push the crown in one click to commence timekeeping.

C. Multi-Calendar Watches (BM1500/BM2400 series):

1) Pull the crown out.

2) Rotate the crown clockwise until the current time is displayed.

- Reference the 24-hour sub dial to ensure am/pm hours are set accordingly (0-12=am, 12-24=pm).

3) Push the crown in to commence timekeeping.

4) Press the button above the crown until the day of the week sub dial displays the correct value.

5) Press the button below the crown until the date sub dial displays the correct value.

Note: If any equipped date indicators are changing in the afternoon rather than at midnight, advance the

hour hand one full rotation (12 hours), then adjust the date indicator(s) as necessary.

www.boumwatches.com

ENG