DTC SOL8SDR-C 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} DTC SOL8SDR-C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DTC SOL8SDR-C 3 페이지.
DTC SOL8SDR-C에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄Revision: 2.0
SOL8SDR-C Quick Start Guide
Initial Communications
DTC's Node Finder application can be used to identify all DTC device Ethernet IP addresses
connected on a network.
The default setting requires the device to be connected by Ethernet to a DHCP server which will
automatically allocate an IP address. If a DHCP server is not available or the SDR is connected
directly to a PC, the SDR and PC IPv4 address will need to be configured to be on the same subnet.
Right-click the SDR on Node Finder to reconfigure the IP settings as needed.
When the SDR IP address has been established, open a web browser, and enter it in the address bar.
On authentication, leave the Username blank and enter the Password as Eastwood.
Copyright © 2023 Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 2
Commercial in Confidence