bouncepad Mobi Case 설치 매뉴얼
{카테고리_이름} bouncepad Mobi Case에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. bouncepad Mobi Case 6 페이지.
페이지 인쇄MOBI CASE
INSTALLATION GUIDE
3.
Press your iPad down into the case as shown above,
making sure the cable is tucked under the lip.
BP-MOB-ART-00001_REV1
1.
Place the Case on a flat surface and turn your iPad
off. If your iPad screen is cracked or damaged, do not
install into the Case.
4.
Hold the Case firmly at the cable end and press your
iPad into the case, making sure your iPad is tucked
under the lip along that edge.
2.
Plug the Lightning connector into your iPad, making
sure it is in the orientation shown above.
5.
Hold the Case steady and press the opposite end of
your iPad down into the Case.
1.