DTF AA-11IN-SHAKER 사용자 설명서 - 페이지 5

{카테고리_이름} DTF AA-11IN-SHAKER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DTF AA-11IN-SHAKER 7 페이지. Powder applicator & dryer

• Align the machine and the printer, so that the printer

feeds the print into the shaker.

• Place the media through the powder machine - refer

to the "Media Winding" section below.

• Flip the main power switch on the control panel.

• Flip the heat switch and set the temperature as

needed.

• Adjust speed of powder shaker motor.

• Set the upside dryer temperature between

100-170°C (Set according to the melting point of the

powder).

• Temperature of the leading heat plate should be

about 60°C - 70°C.

• After the media has finished, turn off the switches.

5. Media Winding

• Feed the media into the powder box through the

outside powder bar.

• Then, cross the space between the upside dryer

and the platform dryer.