ADDCOM ADD-665 사용자 설명서 - 페이지 12

{카테고리_이름} ADDCOM ADD-665에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ADDCOM ADD-665 18 페이지. Dect headset with usb

pAiring HeADset

Ensure that headset is placed on the cradle before power is turned on. If the headset is not

placed on the cradle, pairing will be unsuccessful. The pairing process is automatic once

the power adapter is plugged into the base unit.

To pair more than one headset to a base station, follow the below steps for each headset.

Up to three headsets can be paired to a single base station.

ADD-665 and ADD-685

Place the headset on the cradle

Plug the power adaptor into the base and wait for the LED indicators on the

base station and headset to start blinking

If the pairing is successful, the LED indicators will disappear

Press the 'PC/TEL' button on the base station until the 'in use' LED indicator is

blinking on the headset

Press the 'mute' button on the headset

Ensure the headset has been charged for a minimum of four hours before use.

8.1.1 making an outgoing call in telephone mode

•

Lift the headset from the base to start the call. If you are already wearing the

headset press the call hook button (17) on the headset. The base in-use indicator (2)

will light.

•

If a handset lifter or electronic hook switch device is connected to the headset

base, the line will be seized. Otherwise, you will also need to activate the headset

port via your telephone terminal.

•

Dial the telephone number.

•

After finishing the call, replace the headset on the base or press the call hook

button (17) to disconnect. The in-use indicator (2) will turn off.