ATV aD5 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} ATV aD5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATV aD5 16 페이지.
ATV aD5에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)
페이지 인쇄<2> Trigger Setup Wizard
This wizard measures the sensor output of each pad, and sets the appropriate values so that your
performance is accurately reflected by the sound.
1
In step 3 of the preceding section, press
[Trigger Setup Wizard]
2
Lightly strike the pad that you want to set up
The pad you strike is shown.
3
If the indicated pad is correct, press [NEXT]
* If the wrong pad is shown, strike the pad again.
If the wrong pad is still shown, check the pad
connections.
4
Specify the manufacturer and model of
the pad
Select the item, and use the value knob to
specify the correct setting.
5
Press [NEXT]
6
Using the softest shot (pianissimo) that
you will play during performance, hit
the head three times When the display
indicates "OK," press [NEXT]
In the case of a cymbal, strike the bow.
7
Using the strongest shot (fortissimo) that
you will play during performance, hit
the head three times When the display
indicates "OK," press [NEXT]
In the case of a cymbal, strike the bow.
8
In the same way, use the strongest shot
(fortissimo) that you will play during
performance to hit the specified zone
three times When the display indicates
"OK," press [NEXT]
Specified zone
9
Setup is completed If you want to set up
another pad, press [YES]
Make settings for all pads in the same way.
If you are finished, press [NO].
* It will not be possible to make settings correctly
if crosstalk is occurring. Execute the Crosstalk
Cancel Wizard before you use the Trigger Setup
Wizard.
10
1 Getting Ready