ATW MINI 5 사용자 설명서 - 페이지 13

{카테고리_이름} ATW MINI 5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATW MINI 5 18 페이지. Air-to-water heat pump

10.2.9 Network setting

It is possible to set the IP address, subnet mask and gateway of the network so that the devices can be connected to

the network. If the installation permits, it is possible to activate the DHCP server.

Note: If you dont know what value to set, do not make any changes, or connect the panel to the network. Please

consult your network administrator.

To set the desired value, click on the item you want to edit. The value can be changed using the up and down

arrows. By pressing the Back button, the setting will be saved and the screen will return to the Settings menu.

10.2.10 Backlight setting

To adjust the backlight of the display, highlight the item you want to edit. The value can be changed using the up

and down arrows. By pressing the Back button, the setting will be saved and the screen will return to the Settings

menu.

Backlight

(external power)

Backlight

(battery supplied)

Available backlight time lengths:

- on (----), 10 seconds, 30 seconds,1 minute, 2 minutes.

DHCP deactivated:

DHCP activated:

Changing the value

up and down

Save and return to

the Settings menu

Changing the value

up and down

Save and return to

the Settings menu