AddEnergie CoRe+PSV2 설치 매뉴얼 - 페이지 5

{카테고리_이름} AddEnergie CoRe+PSV2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AddEnergie CoRe+PSV2 14 페이지.

Specifications

Specifications:

Models description:

• CoRe+V2: Level 2 charging station equiped with display and card reader

• CoRe+VBV2: Level 2 charging station without display and without card reader

• CoRe+PSV2: Level 2 charging station equiped with display, car reader and power sharing firmware

Output connector: J-1772 compliant

Split Phase 120/240 VAC Supply or 3 phase 120/208 VAC (must be protected by a 40A breaker or fuse)

Maximum output current( power):

• CoRe+V2 and CoRe+VBV2: 30A (7.2 kW @ 240V or 6.3 kW @ 208V)

• CoRe+PSV2: Dynamically controlled by a site controller between 8A and 30A (between 1.7 kW et 7.2 kW)

Built-in protection against overvoltage conditions and leakage current to ground

Operating Temperature Range: -40°C to +50°C

Certified to NEMA 4X enclosures requirements, suitable for outdoor use.

Shipping weight: Approximately 15 kg

Security standard compliance:

• CSA C22.2 No. 0-10 General Requirements – Canadian Electrical code, part II

• CSA 281.1-12/UL2231-1 Standard for safety for personnel protection systems for electrical vehicle (EV)

supply circuits: General requirements

• CSA 281.2-12/UL2231-2 Standard for safety for personnel protection systems for electric vehicle (EV)

supply circuits: Particular requirements for protection devices for use in charging systems

• CSA C22.2 No. 280-13/UL2594 (1st edition) Electric vehicle supply equipment (EVSE)

www

Models: CoRe+V2, CoRe+VBV2, CoRe+PSV2

Revision: V2

Company Info: AddEnergie Technologies Inc.

Document revision number: V17-2016-03-03

protected by copyright laws of many countries and should not be modified,

reproduced or distributed without the prior written consent of AddÉnergie

Technologies.

254081