Comtech EF Data CDM-625 -5V 조립 지침 매뉴얼

{카테고리_이름} Comtech EF Data CDM-625 -5V에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comtech EF Data CDM-625 -5V 6 페이지.

CDM-625 -5V Rework and Assembly Instructions

These rework/assembly instructions are intended for PL/12587 chassis assemblies -1, -2 and -3. The rework and

assembly required will include the Base Card (PL/11963-1 through -4), the CnC Card (PL/12875-1) and a new

Adapter Card (PL-002094x) along with the power harness that matches each "-" assembly power supply.

Standard AC Chassis (PL/12587-1) – Artesyn P.S.

Qty 1, LB-0020518, Label C-0023329, placed on front panel to indicate upgrade completed.

Qty 2, LB/9107, Label Warranty Seals.

Qty 1, CN/HED02MSR01, 2 pin single row right angle connector. Solder on CnC board.

Qty 1, PL-0020942, -5V adapter board and cable for Artesyn P.S.

DC Chassis (PL/12587-2) – N2 Power P.S.

Qty 1, LB-0020518, Label C-0023329, placed on front panel to indicate upgrade completed.

Qty 2, LB/9107, Label Warranty Seals.

Qty 1, CN/HED02MSR01, 2 pin single row right angle connector. Solder on CnC board.

Qty 1, PL-0020943, -5V adapter board and cable for DC N2 Power P.S.

AC Chassis Packet Processor Option (PL/12587-3) – Lambda P.S.

Qty 1, LB-0020518, Label C-0023329, placed on front panel to indicate upgrade completed.

Qty 2, LB/9107, Label Warranty Seals.

Qty 1, CN/HED02MSR01, 2 pin single row right angle connector. Solder on CnC board.

Qty 1, PL-0020944, -5V adapter board and cable for Lambda P.S.

KT-0020583 (Includes Cutters, RTV Silicone Sealant)

WARNING - This document contains U.S.-origin data, the re-transfer of which is restricted by the Export

Administration Act and Export Administration Regulations (15 C.F.R. 770, et seq.)

Tools Required

Small Flashlight

#1 Philips Screwdriver

Needle Nose Pliers

Part Kits

Tool Kit

D-0020532 REV-D