ATX QFMN 설치 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} ATX QFMN에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATX QFMN 18 페이지. Fiber mini node
페이지 인쇄CHAPTER 2: INSTALLATION
INSTALLATION
2.
Installation
QFMN is designed as a wall or cabinet mounted device. Four mounting holes are available on the chassis to provide the
installer the ability to secure the QFMN device in the required mounting method. QFMN is specified to operate from 0ºC
to+70ºC (+32ºF to +158ºF). The QFMN device should be mounted in an adequately ventilated area to provide adequate air
flow across the chassis and should not be installed in areas of high humidity. Extremely dusty areas should be avoided as
well to eliminate potential contamination of the optical interfaces.
MDU Solutions
– QFMN Fiber Mini Node Distribution Amplifier – Installation & Operation Manual
2-1
®