ATZ HDBT-E100-14 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} ATZ HDBT-E100-14에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATZ HDBT-E100-14 7 페이지. Hdbaset 1x4 splitter hdmi 2.0, hdr, 18g, support 4k@60hz (100m)

페이지 인쇄

Model

: ATZ HDBT-E100-14

Description : HDBaseT 1x4 Splitter HDMI 2.0, HDR, 18G, support 4K@60hz (100M)

2: ID 001

3: ID 010

4: ID 011

5: ID 100

6: ID 101

7: ID 110

8: ID 111

Note: the id% d % d...&%d can select multiple device ids at the same time

(%d cannot exceed 8)

Port% d % d...&%d can select multiple HDBT ports at the same time

(%d cannot exceed 4)

The instruction is only valid if the baud rate is set to 115200

For example: Type #uart id1 port0 bypass=1 to indicate that all ports of HOST with ID

1 are connected to the machine (HOST which is connected to the computer). Then, in

the instruction input bar, send the RS232 bypass instruction: # CMD, as shown in page

RS232 cascade

Host's upper RS232 ring outlet and next RS232 serial port are connected by RS232 male

wires on both sides. Connect channels by sending instructions (note: the ID number of

any two SPH05 cannot be set to the same). It can realize bidirectional transmission of

serial port between any two products or any HDBT receiver with any ID number

Notes

: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,

shape from the actual item delivered from time to time.

2: HDBT 2

1: Connect the port of the

selected ID to the port that

3: HDBT 3

sent this instruction

4: HDBT 4

pg. 6

All specifications are subject to change without prior notice.