ATZ HDMI4K-EM120TR 매뉴얼 - 페이지 8

{카테고리_이름} ATZ HDMI4K-EM120TR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATZ HDMI4K-EM120TR 14 페이지. 4k hdmi+usb kvm extender over ip / fiber

페이지 인쇄

Model

: ATZ HDMI4K-EM120TR

Description : 4K HDMI+USB KVM Extender over IP / Fiber

Anti-Dither (1/2/off)

Engineering Mode

Reset to Default

Ethernet Jumbo Frame

Buttons that shall not be removed for this setup:

Depending on customer feature needs.

Example: If customer have loopback feature, than button one is required.

Notes

: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour,

shape from the actual item delivered from time to time.

Graphic Mode: FW will fix the trade-off to ensure best

graphic/text viewing experience.

Anti-Dithering Mode is design to work with ATI graphic cards

that provide dithering output. Dithering output is used to make

coloring looks better than it's original color depth. It uses visual

transient to create a half-tone effect. However, this presents

great difficulty for Video Compression to maintain low bandwidth

even if the source display seems static.

Currently, we only see Dithering Output with ATI graphic cards.

To resolve this issue, AST1500 provides Anti-dithering for 1 bit,

2 bit, or off.

If the source content does not generate dithering output and

this feature is turn on. It will create a blocking effect because

Video Engine are unable to detect pixel changes. User can avoid

this issue by turning this feature to off.

1. Static IP: 192.168.0.88

2. User can connect to http://192.168.0.88 webpage for

firmware update.

3. Firmware update file name will be:

Host: webfwh.bin

Client: webfwc.bin

1. Reset Any changes in SPI flash setup flag.

2. Re-generate Random mac to avoid any possible MAC collision.

After Reset to Default and reboot cycle, a new random mac will

be generated.

1. This feature is only available on AST1510 and above.

AST1500 will be by pass this event.

2. Enable/Disable Ethernet jumbo frame.

3. If link LED is solid then jumbo is enabled. If link LED is

blinking then jumbo is disabled.

pg. 8

All specifications are subject to change without prior notice.