Comtrend Corporation PG-9141s-PoE 빠른 설치 매뉴얼 - 페이지 3
{카테고리_이름} Comtrend Corporation PG-9141s-PoE에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comtrend Corporation PG-9141s-PoE 6 페이지. Powerline ethernet adapter with power over ethernet
페이지 인쇄
B. Device Connection
These steps show how to connect a PowerGrid 9141s-PoE to a network device.
Below we use a PoE camera as a network device.
1. Plug a PowerGrid 9141s-PoE unit into the power outlet closest to the
PoE(IEEE 802.3af compliant) camera or other device.The Power LED on the
PowerGrid 9141s-PoE should light up GREEN.
2. Connect the PowerGrid 9141s-PoE to the camera with an Ethernet cable. The
Ethernet and PoE LEDs on the PowerGrid 9141s-PoE should light up GREEN.
3. The STATUS LED on the PowerGrid 9141s-PoE (s) should now be
ORANGE.
4. If the STATUS LED is not GREEN, press the "Config" button on each of the two
PowerGrid 9141s and 9141s-PoE devices for 2-5 seconds. Upon successful
connection of the PowerGrid 9141s-PoE, the STATUS LED will light up Green.
5. If the connection process is not successful, please refer to the trouble shooting
steps in section D.
C. Adding a New Device
Follow steps 1-4 in Part B to add additional PowerGrid 9141s-PoE devices to the
network. Press the "Config" button on the new device and one other PowerGrid
device in the network so they can pair and transmit data successfully.
RED,GREEN
or
Page 3