ABSTRACT Twister 4 사용 설명서 - 페이지 17

{카테고리_이름} ABSTRACT Twister 4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSTRACT Twister 4 19 페이지.

Abstract Universal Instruction Manual

Dipswitch settings

The Abstract CE controller can show you a picture of how the dip switches

should be set. If you are using this controller, ignore the settings below.

Settings for all heads if not listed below

Settings for Twister 4

Settings for ClubColour & DuoColour

The dipswitches are set in binary code (1=switch 1 on). To work out how you

need to set the dipswitches to get a certain channel number, use the following

step-by-step procedure:

Step 1: Is number more than 256? If so turn switch 9 on and subtract 256.

Step 2: Is resulting number more than 128? If so turn switch 8 on and subtract 128.

Step 3: Is resulting number more than 64? If so turn switch 7 on and subtract 64.

Step 4: Is resulting number more than 32? If so turn switch 6 on and subtract 32.

Step 5: Is resulting number more than 16? If so turn switch 5 on and subtract 16.

Step 6: Is resulting number more than 8? If so turn switch 4 on and subtract 8.

Step 7: Is resulting number more than 4? If so turn switch 3 on and subtract 4.

Step 8: Is resulting number more than 2? If so turn switch 2 on and subtract 2.

Step 9: Is result 1? If so turn switch 1 on.

If you have a calculator which can display binary, just convert the channel

number to binary and turn on the '1' bits (switch 1 is the right hand bit).

Page 17