COMTRUK HD150 설치 매뉴얼 - 페이지 2
{카테고리_이름} COMTRUK HD150에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. COMTRUK HD150 10 페이지. Heavy duty platform rack
페이지 인쇄User Information:
Before using the Comtruk HD150 Platform, read these
installation instructions and familiarise yourself with the
system and process of its use.
This installation manual presents the basic information and
describes precautions involved in the use of the product.
Please adhere to the instructions in this manual for your
own safety and the safety of others. Failure to observe the
instructions may lead to damage to the system and
vehicle, injury to users of the system and vehicle.
It is the responsibility of the user to make sure that the
completed vehicle, with utility bed and accessories, con-
forms to all regulations and applicable laws of the State or
Territory in which the vehicle is to be registered.
Overview:
Note, some qty will vary, depending on platform size.
Parts list:
1 - End extrusion (x2).
2 - Side extrusion (x2).
3 - Plank (platform dependent).
4 - Side extrusion rubber (x2).
5 - Plank rubber (platform dependent).
6 - End extrusion rubber (x2).
7 - Corner moulding (x4).
8 - M6 x 16mm pan head screws (x8).
10
9 - M6 x 18mm counter-sunk
screws (x16).
10 - M6 x 35mm counter-sunk
screws (platform dependent).
11 - M6 channel nut (platform
dependent).
12 - Mounting brackets (x4).
13 - M8 x 25mm pan head screw.
14 - M8 spring washer (x8).
15
16
12
14
13
HD150 Platform WARNINGS:
1 - Maximum load capacity for platform is 150kgs or
330lbs. Maximum static capacity is 400kg/ 880lbs.
2 - Never exceed the maximum permissible loading of
the HD150.
3 - Always uniformally distribute the load across the base
platform. Loads that extend beyond the platform could be
considered as over loading the unit and not safe
4 - Never attempt to modify the HD150.
5 - Always ensure the HD150 is secure with a minimum
of 4 fi xing locations.
8
7
9
11
2
15 - M8 x fl at washer (x8)
16 - M8 channel nut (x4).
Tool Required:
- 4mm allen key.
- Flat bench.
- 5mm allen key.
4
5
3
1
2
6