Aube Technologies TH132 F 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Aube Technologies TH132 F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aube Technologies TH132 F 2 페이지. Programmable control module
Aube Technologies TH132 F에 대해서도 마찬가지입니다: 소유자 매뉴얼 (3 페이지), 소유자 매뉴얼 (3 페이지), 소유자 매뉴얼 (2 페이지)

페이지 인쇄

Program Your Schedule

The schedule is used with the Automatic mode. The

schedule controls the heating system to automatically

switch between the Comfort and Economy temperature

setpoints at the times you have programmed.

The schedule consists of 4 programs per day defined as

follows:

Programs

Setpoint

Time

Wake-up

Leave home

Back home

Night

The programs' start time can be different for each day of the week.

To enter the programs' start time

To shorten programming, you simply have to enter the

start time for each program.

Press PGM.

Press DAY to select the day (hold for 3 seconds to

select all days of the week).

Temperature Control

The TH132 thermostat works differently than conventional

electromechanical thermostats.

It is equipped with a proportional integral adaptive (PIA)

controller which determines heating cycles by analyzing

the temperature behavior history within the room.

The PIA controller reduces temperature swings providing

accurate temperature control while increasing user com-

fort.

The controller determines the amount of power required

by the heating system to maintain the setpoint tempera-

ture.

When the heating system is activated, one of the following

icons is displayed:

1 to 20%

21 to 40%

41 to 60%

61 to 80% 81 to 100%

Note:

It is sometimes faster to program the same sched-

ule for the entire week and then to modify the exception

days.

Press PGM to select the program number (e.g. 1).

Press HOUR and MIN to set the start time.

Repeat steps 3 to 4 for remaining programs (e.g. 2, 3

and 4).

Press MODE/RETURN to exit.

Note:

After 60 seconds of inactivity, the thermostat will

automatically exit programming mode.

To clear a program time:

When you clear a program time entry, the TH132 will

maintain the temperature setpoint of the last executed

program until the beginning of the next program.

Repeat steps 1 to 3 above.

Press CLEAR to erase the time entry. The time por-

tion of the LCD indicates --:-- when the program is

inactive.

Press MODE/RETURN to exit.

Technical Specifications

Model: TH132 A / AF / F

Display

range: 32°F to 140°F (0°C to 60°C)

Setting range

: 40°F to 86°F (5°C to 30°C)

(ambient)

Setting range

: 40°F to 104°F (5°C to 40°C)

(floor)

Pre-programmed temperature

setpoints:

Comfort: A/AF: 68°F (20°C) and F: 82°F (28°C)

Economy: A/AF: 64°F (18°C) and F: 68°F (20°C)

Vacation: A/F/AF: 50°F (10°C)

Floor

limit: AF: 82°F (28°C)

Temperature resolution display

Storage:-4°F to 120°F (-20°C to 50°C)

Software: Class A

Controller: Electronic

Temperature

control: Proportional integral adaptive,

15-minute heating cycles

Programming

protection: Protected memory

Clock

protection: 2 hours

Size

(H/W/D): 3.3 x 3.1 x 0.5 in (83 x 79 x 13 mm)

Programming Example

Programs

6:00

8:30

16:00 16:00 16:00 16:00 16:00 --:--

23:00 23:00 23:00 23:00 23:00 23:00 23:00

Comfort :

• Monday to Friday, between 6:00 and 8:30 and

between 16:00 and 23:00.

• Saturday and Sunday, between 6:00 and 23:00.

Economy :

• Monday to Friday, between 8:30 and 16:00 and

between 23:00 and 6:00.

• Saturday and Sunday, between 23:00 and 6:00.

To program this schedule

Press PGM.

Press and hold DAY for 3 seconds to select all days

of the week.

Press PGM to select program 1.

Set the time (6:00) using the HOUR and MIN buttons.

Warranty

AUBE TECHNOLOGIES INC. TWO (2) YEAR LIMITED WARRANTY

This product is guaranteed against workmanship defects

for a two-year period following the initial date of purchase.

During this period, AUBE Technologies Inc. will repair or

replace, at our option and without charge, any defective

product which has been used under normal conditions.

The warranty does not cover delivery costs and does not

apply to products poorly installed or randomly damaged

following installation.

This

warranty

cancels

manufacturer's express or implied warranty as well as any

other company commitment. AUBE Technologies Inc.

scale: 0.1°

cannot be held liable for related or random damages

following the installation of this product.

The defective product as well as the purchase invoice

must be returned to the place of purchase or mailed,

prepaid and insured, to the nearest shipping address.

Press PGM to select program 2.

Set the time (8:30) using the HOUR and MIN buttons.

Repeat step 4 for remaining programs:

6:00

program 3 (16:00) and program 4 (23:00).

8:30

--:--

When all programs are configured, press MODE/

--:--

RETURN to exit.

To erase programs 2 and 3 for Saturday and

Sunday

Press PGM.

Press PGM to select program 2.

Press DAY to select SAturday (SA).

Press CLEAR to erase the time (--:--).

Press DAY to select SUnday (SU).

Press CLEAR to erase the time (--:--).

Press PGM to select program 3.

Repeat steps 3 to 6.

Press MODE/RETURN to exit.

If you have any questions concerning the programming of

the TH132 programmable thermostat, call our technical

support team at:

705 Montrichard

Saint-Jean-sur-Richelieu

Quebec, Canada J2X 5K8

Tel.: (450) 358-4600

Toll Free: 1-800-831-AUBE

and

replaces

any

other

Fax: (450) 358-4650

Email: [email protected]

For more information on our products, visit us at:

10 rue Ampère

95500 Gonesse

France

33 (0) 1 34 07 99 00

33 (0) 1 34 07 99 19

[email protected]

www.aubetech.com

® partner, Aube Technologies has

As an E

NERGY

TAR

determined that this product meets the E

NERGY

TAR

guidelines for energy efficiency.

26/08/2003

400-132-000-A